Installation Guide

ZZZ-204.43224.0210-21.GP.EN.doc WEB VERSION 12
Step 13:
1. Install the upper
crossbars on the
interior of the roof
using bolts “Pp”,
following the
shaped ends
and letters. Do
not tighten bolts
immediately;
install loose and
tighten once all
crossbars are
in place.
2. Repeat this
step with the
lower
crossbars.
Step 14:
1. Secure each foot plate
into the ground using
screws “Rr” and
Washers “Tt”.
2. Use lag shields (Ss) if
needed for harder
surfaces.
Pp
Pp
Pp