Installation Guide

7
ZZZ-212.43200.0831-17.GP.EN.HER HER-HL
Step 13:
Install the upper
crossbars on the interior
of the roof using bolts
“Pp”, following the
shaped ends and letters.
Do not tighten bolts
immediately; install
loose and tighten once
all crossbars are in
place.
Repeat this step with the
lower crossbars.
Step 14:
a) Secure each foot plate into
the ground using screws “Rr”
and washers “Tt”.
b) Use lag shields (Ss) if
needed for harder surfaces.
Pp
Pp
Pp