Installation Guide

ZZZ-212.43200.0114-21.GP.EN.doc WEB VERSION 8
Step 5:
1. Attach Mounting Brackets “O” and “P” to Rafters “M” and “N” respectively. Use threaded hole
about 8 ½” & 5” from end of rafter.
2. Lift Central Hub “L” to a height of about 110” (2.79m) at the center of the gazebo. (Caution: this
part may be heavy, use support as needed)
3. Attach one end of Rafter “M” to the Hub using 2 Bolts “Pp”. Attach other end with Mounting
Bracket to the corner of the beam assembly with 2 bolts “Pp”. Use the set of holes closest to
the inside. Repeat with remaining “M” Rafters.
4. Similarly, attach one end of Rafter “N” to the hub using 2 Bolts “Pp”. Attach other end with
Mounting Bracket to the beam assembly with 2 Screws “Pp”. Use the set of holes closes to the
inside. Repeat with remaining “N” Rafters.
Step 6:
1. Once all Rafters are in place, install
Top Cap “K” over Central Hub “L”.
Use flat washers and Acorn Nuts “Vv”
to secure tightly.