customerservice@gazebopenguin.com 41215-12 Sand 41215-32 Slate 12 X 15 SOLARIUM ASSEMBLY INSTRUCTIONS DO NOT DESTROY THE BOXES UNTIL COMPLETELY ASSEMBLED PLEASE VERIFY THE CONTENT OF EACH BOX AGAINST THE LIST OF PARTS Assembly by three people is recommended. Base Dimensions 12’ ½”x15’6”, Largest Dimensions 13’6”x16’11” (see pg.13) ZZZ-183.41215.1207-18.GP.EN.SUN.
Before you assemble the Solarium Please don't destroy boxes until completely assembled. Please verify the content of each box against the list of parts. It is important that this solarium be installed on a solid base with the provided screws. Otherwise, please ensure that you use anchors sufficient for your surface. • The solarium should not be installed adjacent to trees or a sloped roof. Snow and ice may slide onto the solarium and cause it to collapse.
12x15 Solarium Assembly Instructions Step 1: Before starting to assemble, please decide where you would like to position the door panels. 1. Stand up two regular frames (A), using two connecting pieces (E) and affix the panels (A) together. 2. Stand up a frame meant to be next to the door (B) and a door frame (D), placing the door frame either on the left or right, then use two connecting pieces (E) to affix the panel and door frame. 3.
Step 2: 1. Slide top door rail (F) into wheels of sliding door. 2. Slide lower door rail (G) into the plastic guide of the sliding door (C). 3. Use bold (Bb) to affix the plastic stoppers (H) one on each end of top door rail (F). 4. Use screw (Oo) to affix upper door rail end caps (Nn) one on each end of top door rail (F). Step 3: Please note the sliding door should be installed from the inside of the solarium. 1.
Step 4: 1. Attach roof rafters (L) to the central hub (N) using bolt (Bb). 2. Use screw (Z) to affix the rafters (L) onto the top of panels going through the metal piece attached to the rafter (L). Note: Rafters must be affixed where panels connect to each other. Step 5: Use the same method to assemble roof rafters (K) for the angled panels. The rafters (K) should be affixed to the mounting bracket using the hole that will be furthest away from the corner of the unit.
Step 6: Use nut (Hh) and washer (Gg) to affix the top cap (M) to the central hub (N). Step 7: First remove the protective layer from the PC roof panels, then insert them (Y, Aa, Ll, Qq) into the roof rafters according to the below drawing instructions. Note: the side that had the protective layer should be face down. K ZZZ-183.41215.1207-18.GP.EN.SUN.
Step 8: After inserting the upper PC panels, insert the aluminum middle roof joints (O, P, Q, Pp) into the roof rafters. The below drawing view is from inside the solarium looking up. Note: • The drain holes on the aluminum middle roof joints (O, P, Q, Pp) should be at the bottom.
Step 10: Once the PC roof is complete, use aluminum edging (S, U, W, Ss) to surround the edges of PC roof, and using bolt (Bb) and roof joint (R), tighten securely. Step 11: Once the installation of the edging complete, start affixing the roof cross bars (T, V, X, Tt) using bolt (Ff). Affix the top cross bars (Uu) onto the roof rafter (L) using bolt (Ff). ZZZ-183.41215.1207-18.GP.EN.SUN.
Step 12: Inside each of the panels (A, B), push two plastic plugs (Ii) into the ground, and then screw down the panels using two screws (Ee) for each panels. Special notes: 1. To remove windows (08-219), pull 1 pin out of the lock position and push the frame to the end of the track, then ease the window out of the tracks one side at a time. 2. To remove screening panel, first remove windows, then unscrew the 2 screws at the top corners of the screen frame. 3. Note that this unit is not waterproof.
08-129-12 REGULAR 6 DOOR TO DOOR B 2 2 2 SLIDING DOOR FRAME 08-136-12 4 12 RAIL E F 08-137-12 08-138-12 4 PLASTIC 2 STOPPER G H 08-139-12 08-140-12 135° ANGLED 135° ANGLED 4 8 INSIDE CONNECTOR CONNECTOR I J 08-141-12 08-142-12 ROOF RAFTER 4 ROOF 8 RAFTER K 5 CENTRAL 1 HUB 5 4 MIDDLE ROOF JOINT P 08-147-12 08-148-12 MIDDLE QTY 4 4 8 4 6 5 1 5 4 5 14 08-146-12 O ROOF JOINT 5 N 08-145-12 ROOF JOINT 2 L M MIDDLE 4 08-178-12 08-179-12 TOP
5 4 ROOF CROSS BAR S QTY 5 4 5 4 5 4 5 28 5 54 5 2 5 24 5 39 5 24 08-152-12 5 4 ROOF CROSS BAR U V 08-154-12 08-153-12 EDGING DRAWING T 08-151-12 EDGING IN BOX DESCRIPTION 08-150-12 08-149-12 EDGING DRAWING PACKED QTY IN BOX PACKED DESCRIPTION 5 4 ROOF CROSS BAR W X 08-155-12 (24 ¼”X42 ¼”) TOP ROOF 08-156-12 1 4 SCREW LEFT PANEL Z Y 08-157-12 (24 ½”x46 ½”) TOP ROOF CORNER 08-158-12 1 4 BOLT Bb PANEL Aa 08-165-12 08-161-12 BOLT 5 12 RIGHT DOOR
08-195-12 08-196-12 (47”x47 ½”) (46 ¼”x43”) BOTTOM ROOF CORNER 1 BOTTOM 4 ROOF LEFT PANEL PANEL Jj Kk 1 4 1 4 5 4 1 2 5 2 5 2 5 12 DRAWING 08-198-12 08-197-12 (46 ¼”x43”) (24 ¼”x42 ½”) TOP RIGHT QTY DESCRIPTION IN BOX DRAWING PACKED QTY IN BOX PACKED DESCRIPTION 1 BOTTOM 4 ROOF RIGHT ROOF PANEL PANEL Ll Mm 08-134-12 UPPER DOOR RAIL END 08-135-12 5 4 SCREW CAP Oo Nn 08-172-12 08-170-12 MIDDLE ROOF JOINT (41 ¼”x42 ¼”) 5 TOP ROOF 2 CENTER Pp PANEL
08-129-32 REGULAR 6 DOOR TO DOOR B 2 2 2 SLIDING DOOR FRAME 08-136-32 4 12 RAIL E F 08-137-32 08-138-32 4 PLASTIC 2 STOPPER G H 08-139-32 08-140-32 135° ANGLED 135° ANGLED 4 8 INSIDE CONNECTOR CONNECTOR I J 08-141-32 08-142-32 ROOF RAFTER 4 ROOF 8 RAFTER K 5 CENTRAL 1 HUB 5 4 MIDDLE ROOF JOINT P 08-147-32 08-148-32 MIDDLE QTY 4 4 8 4 6 5 1 5 4 5 14 08-146-32 O ROOF JOINT 5 N 08-145-32 ROOF JOINT 2 L M MIDDLE 4 08-178-32 08-179-32 TOP
5 4 ROOF CROSS BAR S QTY 5 4 5 4 5 4 5 28 5 54 5 2 5 24 5 39 5 24 08-152-32 5 4 ROOF CROSS BAR U V 08-154-32 08-153-32 EDGING DRAWING T 08-151-32 EDGING IN BOX DESCRIPTION 08-150-32 08-149-32 EDGING DRAWING PACKED QTY IN BOX PACKED DESCRIPTION 5 4 ROOF CROSS BAR W X 08-155-32 (24 ¼”X42 ¼”) TOP ROOF 08-156-32 1 4 SCREW LEFT PANEL Z Y 08-157-32 (24 ½”x46 ½”) TOP ROOF CORNER 08-158-32 1 4 BOLT Bb PANEL Aa 08-165-32 08-161-32 BOLT 5 12 RIGHT DOOR
08-195-32 08-196-32 (47”x47 ½”) (46 ¼”x43”) BOTTOM ROOF CORNER 1 BOTTOM 4 ROOF LEFT PANEL PANEL Jj Kk 1 4 1 4 5 4 1 2 5 2 5 2 5 12 DRAWING 08-198-32 08-197-32 (46 ¼”x43”) (24 ¼”x42 ½”) TOP RIGHT QTY DESCRIPTION IN BOX DRAWING PACKED QTY IN BOX PACKED DESCRIPTION 1 BOTTOM 4 ROOF RIGHT ROOF PANEL PANEL Ll Mm 08-134-32 UPPER DOOR RAIL END 08-135-32 5 4 SCREW CAP Oo Nn 08-172-32 08-170-32 MIDDLE ROOF JOINT (41 ¼”x42 ¼”) 5 TOP ROOF 2 CENTER Pp PANEL
ZZZ-183.41215.1207-18.GP.EN.SUN.
MAINTENANCE NOTES 1. In case of a defective or damaged part, or for any other questions concerning the product, please contact the manufacturer directly. 2. Please have the parts list and part numbers on hand when ordering or requesting replacement parts. 3. The product should not be installed adjacent to trees or a sloped roof. Snow and ice may slide onto the roof and cause it to collapse. 4. While the product is designed for 4 seasons use, the roof must be kept free of accumulation of snow.
