Installation Guide

ZZZ-183.41215.1116-20.GP.EN.doc WEB VERSION

Step 4:

1. Attach roof rafters (L) to the central hub (N) using bolt (Bb).

2. Use screw (Z) to affix the rafters (L) onto the top of panels going through the metal piece attached

to the rafter (L).

Note: Rafters must be affixed where panels connect to each other.

Step 5:

Use the same method to assemble roof rafters (K) for the angled panels. The rafters (K) should be

affixed to the mounting bracket using the hole that will be furthest away from the corner of the

unit.

Note: Do not tighten the bolts right away as you may have to adjust the angle when inserting the PC

roof panels.