Installation Guide
ZZZ-183.41215.1207-18.GP.EN.SUN  WEB VERSION   SUN-HI 6 
Step 8: 
After inserting the upper PC panels, insert the aluminum middle roof joints (O, P, Q, Pp) into the 
roof rafters. The below drawing view is from inside the solarium looking up. 
Note:   
  The drain holes on the aluminum middle roof joints (O, P, Q, Pp) should be at the bottom. 
  To adjust the middle joints to line up : once all polycarbonate roof panels are in place, use a 
small piece of wood and hammer, then tap down on the middle of the joint bringing it down 
and holding at the same time the joint and top polycarbonate.   
Do not tap too hard. 
Step 9: 
After the installation on the middle roof joints complete, insert the bottom PC roof panels (Jj, Kk, 
Mm, Rr) according to below drawing. They should overlap about two inches under the upper PC 
roof panels and into the aluminum middle roof joints. 
Before 
After 
Before 
After 










