Vogue Inset Installation User Instructions

4
3.4 Locate the top edge of sub-frame onto the tabs found at the
top of convector box and push down firmly to ensure correct
fitting, see Diagram 3.
3
Slide Control Model
3.5 Secure the sub-frame to the bottom of the appliance with
the 2 fixing screws provided, see Diagram 4.
4
Installation Instructions
4. Fitting the Vogue Inset Front
Slide Controls Models only
4.1 Remove the cast infill from the front by unscrewing the 2
screws. This provides a cutout for the slide mechanism,
see Diagram 5.
5
Caution: When fitting the front ensure that the
cutout fits around the slide mechanism, see
Diagram 6. Take care not to damage the slide
control handle during installation.
6