Logic HE Balanced Flue Log Installation User Instructions

7
User Instructions
2b.19 Press the SET button to enter the Thermostatic mode.
2b.20 Press the Set button again to see the current temperature
setting and mode - for example the a Sun symbol on the left
shows it is Day Mode and the default temperature is 24.
2b.21 With the temperature displayed, press + or - to alter the
setting.
2b.22 Press the MODE button repeatedly to scroll through the
settings and to select Night mode or Frost Protection.
The handset must be left in the chosen mode for it to
operate.
2b.23 When finished press SET again and the new setting will be
accepted.
The display will return to the time of day screen.
If at any time the power button is operated during Thermostatic
Mode the control will cancel any thermostat operation and return
the handset to Manual Mode.
Setting Timer Mode (in Thermostatic Operation)
Timer Mode will turn the appliance off after a set period of time has
elapsed.
Timer Mode can be set before or during thermostatic operation of
the fire.
2b.24 Hold the handset to unlock, press and release the MODE
button until the word MAN and the Zzz symbols are flashing
at the top of the display.
2b.25 Press and release the SET button.
This will activate the Timer mode.
The default time period is 1 hour, unless altered in
2b.39.
2b.26 Pressing the SET button again will show the remaining
Time.
This can be altered by pressing the + or - buttons.
The timer can be set between 1 minute and 24 hours.
2b.27 After adjusting the time press SET again to confirm the time
setting desired.
Once the countdown has reached zero the fire will turn off.
Note: If Timer mode is activated and the fire is
manually turned off, the timer will be cancelled.
Changes to the Timer will reset to the default time
on next use.
If the fire is off when the Timer mode is set then the
timer will automatically start when the fire is turned
on.
Setting the Clock
To adjust the time on the handset after initial set up:
Holding the remote to keep the green light on and the
handset unlocked:
2b.28 Press and hold the SET button until a beep is heard to
indicate the command has been received.
2b.29 Release the SET button. PROG will be displayed at the top
left of the display.
2b.30 Press the MODE button twice until SET UP flashes in the
top right of the display.
2b.31 Press and release the SET button. The handset will display
an H:24, see Diagram 5.
5
24 denotes a 24 hour clock and 12 denotes a 12 hour clock.
2b.32 Press the + or - button on the handset to toggle between the
two settings.
Press the SET button to confirm and progress to setting the
day of the week.
Setting the Day of the Week
2b.33 Press and release the + and - buttons until the correct day
of the week is shown on the display.
6
Mo = Monday, Tu = Tuesday, We = Wednesday, Th = Thursday,
Fr = Friday, Sa = Saturday and Su = Sunday.
2b.34 Press SET to confirm the day of the week and progress to
setting the time.