Balanced Flue Instructions

9
7.13 Place the third log into the groove on the right hand side,
see Diagram 18.
The log should butt up against the raised molding and the
right hand side liner.
Log 3
18
7.14 Once the logs are in there are two embers which can be
loosely placed at the front of the fuel bed and cover the tabs
securing the burner tray, see Diagram 19.
Embers
19
7.15 Use some of the Embaglow provided and cover the ports in
the burner tray with a liberal amount of fibres,
see Diagram 20.
It is essential to cover the port in the middle of the
burner tray in order to get the most visually appealing
flame picture.
NOTE: It is not necessary to use all of the Embaglow.
It is essential to
cover the
central port
Embaglow
20
7.16 Fix log guard into position, see Diagram 21.
21
Medium Vision Layout
The logs for the fuel bed are clearly individually labelled,
A to D.
7.17 Ensure the burner tray is clean and free from any debris,
see Diagram 22.
22
7.18 There are 3 embers. Place 2 embers in the back corners of
the burner, resting in the cut outs, see Diagram 23.
Place the last ember loosely at the front of the fuel bed to
cover the hole in the centre.
23
User Instructions