Balanced Flue Instructions

8
7.7 Place the pointed bottom of log D into the corner of the
burner tray and rest on the location stud on log B, see
Diagram 12.
12
7.8 Use some of the Embaglow provided and cover the ports in
the burner tray with a liberal amount of fibres. Use a small
piece in front of the log on the left hand side and a long strip
in front of log B, see Diagram 13.
NOTE: It is not necessary to use all of the Embaglow.
Embaglow
13
7.9 Lower log guard into position, see Diagram 14.
14
Midi Vision Layout
7.10 Ensure the burner tray is clean and free from any debris,
see Diagram 15.
15
The three logs that make up the fuel bed are visually distinct
and fit into specific parts on the burner tray.
7.11 Place the rear log into position between the rear brackets
and pushed up against the back panel, see Diagram 16.
Log 1
16
7.12 Place the second log into the left hand groove on the burner
tray, see Diagram 17.
The log should butt up against the raised molding and the
left hand side liner.
Log 2
17
User Instructions