Balanced Flue Instructions

28
Installation Instructions
9.16 Fix log guard into position, see Diagram 32.
32
Medium Vision Layout
The logs for the fuel bed are clearly individually labelled,
A to D.
9.17 Ensure the burner tray is clean and free from any debris,
see Diagram 33.
33
9.18 There are 3 embers. Place 2 embers in the back corners of
the burner, resting in the cut outs, see Diagram 34.
Place the last ember loosely at the front of the fuel bed to
cover the hole in the centre.
34
9.19 Place Log D on the left hand side of the burner. There is a
hole on the underside of Log D which fits over the raised
stud on the left of the burner. The back of the log should rest
flat against the back panel, see Diagram 35.
35
9.20 Place Log B on top of Log D. There is a hole on the
underside of Log B which fits over the raised stud on Log D
to secure in place. The right hand side of the log rests in the
groove in the burner, see Diagram 36.
36
9.21 Place Log C on the right hand side of the burner. There is a
hole on the underside of Log C which fits over the raised
stud on the right of the burner. The back of the log should
rest flush against the back panel, see Diagram 37.
37