Balanced Flue Instructions

MINIMUM CLEARANCE

7.8 The appliance is not suitable for installation against a

combustible wall. All combustible materials must be

removed from behind the appliance.

7.9 Ensure that all minimum clearances to combustible

materials are complied with, see Diagrams 9 & 10.

The specified clearances provide the minimum distance to

combustible materials. If the appliance is intended to be

installed into a non-combustible opening the clearance to the

sides and above the appliance can be reduced. However, it

is recommended that the specified clearances are

maintained irrespective of the materials used in the

construction of the opening to allow adequate air flow and

access to controls. The clearance at the rear of the

appliance must always be a minimum of 50mm.

150

225

150

50mm

150mm

Installation Instructions

Site Requirements