Tempo Frame Installation User Instructions

3
Installation Instructions
2. Fitting the Decorative Frame
Slide Control Models only:
Caution: When fitting the front ensure that the
cutout fits around the slide mechanism, see
Diagram 1. Take care not to damage the slide
control handle during installation.
1
Slide Control Models only
The following instructions cover the fitting of the decorative
front for all models.
2.1 Locate top edge of frame onto tabs found at the top of
convector box and push down firmly to ensure correct fitting,
see Diagram 2.
2
2.2 Secure frame at base with fixing screws as shown to ensure
rigid fixing, see Diagram 3.
3
3. Fitting the Tempo Front
3.1 Align front with locating lugs on either side of frame and
push down into position, see Diagram 4.
4
3.2 Place ash pan cover into position at base of the front,
see Diagram 5.
5
4. Cleaning and Controls
Ensure the appliance is cold before attempting to clean
the front.
4.1 The front should be cleaned using a damp cloth and buffed
with a lint free duster.
4.2 Access to the controls is behind the ash pan cover.