Stockton Inset Front For use with the Logic HE Instructions for Use and Installation For use in GB, IE (Great Britain and Republic of Ireland) PR0922 Issue 6 (May 2019)
Installation Instructions Covering frame model numbers: 2. Fitting the Decorative Front Stockton 7 Inset Logic HE BEFORE FITTING THE STOCKTON FRONT THE APPLIANCE MUST BE SECURED FIRMLY TO THE FIREPLACE OPENING AND THE HEARTH. DUE TO THE WEIGHT OF THE FRONT IT IS ADVISABLE TO SECURE THE APPLIANCE TO THE FIREPLACE OPENING USING THE SCREWS AND RAWL PLUGS SUPPLIED. 901-488 1. General 1.
Installation Instructions/ User Instructions All Models To remove the door from the casting: 2.4 Open the door by turning the handle through 90° to the right, see Diagram 3. 2.8 Replace the door by slotting the hinge pins into the hinge blocks. Ensure the hinge pins are pushed fully down. 6 3 2.9 Close the door and turn the handle through 90° to lock in position, see Diagram 6. 2.10 Unpack the ash cover.
Gazco Limited, Osprey Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7JG Technical Customer Services: (01392) 261950 Fax: (01392) 261951 E-mail: technicalservices@gazco.
