Steel Frame For use with the E-StudioTM and LogicTM HE Convector Fires Instructions for Installation For use in GB & IE (Great Britain & Republic of Ireland).
User Instructions/Installation Instructions Installation Instructions User Instructions Covering Model 8695IR 1. Operation 1.1 1.2 To open the decorative frame, gently lift the right-hand side of the front and pull towards you. The door opens on the hinges allowing access to the controls and window frame assembly. 1. General 1 To close the decorative frame, push the front door until the front tabs locate in the slots on the back panel and the magnets retain the door in position.
Installation Instructions 2 THE FIXINGS SUPPLIED SHOULD BE SUFFICIENT WHEN MOUNTING ONTO A BRICK OR BLOCK WALL. YOU SHOULD, HOWEVER, USE SUITABLE FIXINGS WHEN MOUNTING ON A WALL CONSTRUCTED OF AN ALTERNATIVE MATERIAL. 2.6 Re-attach the front panel to the back by dropping the two pins into their appropriate barrels. Note this must be dropped into place at 90ยบ (right angles) to the back panel, Diagram 5. 5 2.2 Separate the back and front sections of the frame.
Gazco Limited, Osprey Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7JG Tel: (01392) 261999 Fax: (01392) 444148 E-mail: info@gazco.
