Logic HE Conventional Flue Combined Controls Installation User Instructions

40
Servicing Instructions - Replacing Parts
9. Ignition Unit
(Slide Control Model only)
9.1 Remove the battery, see Section 1.
9.2 Remove the 2 leads and the pilot ignition lead from the
ignition unit, see Diagram 40.
Leads
40
Pilot Ignition
Lead
Screw
Screw
(Behind unit)
9.3 Undo the 2 screws securing the unit in place, see
Diagram 40.
9.4 Replace in reverse order.
10. Changing between Gas Types
The following parts must be changed when converting an
appliance from one gas type to another:
Manual Control:
PART COAL EFFECT STONE EFFECT
BURNER
ASSEMBLY
NG GZ8373 GZ8322
LPG GZ8374 GZ8326
DATABADGE
NG PR1055 PR1040
LPG PR1056 PR1054
BURNER
COVER GASKET
NG CE0273 N/A
LPG CE0498 NA/
Remote Control:
PART COAL EFFECT STONE EFFECT
BURNER
ASSEMBLY
NG GZ10745 GZ11166
LPG GZ11164 GZ11167
DATABADGE
NG PR1877-LG-HE PR1877-LG-HE
LPG PR1877-LG-HE PR1877-LG-HE
BURNER
COVER GASKET
NG CE0273 N/A
LPG CE0498 N/A
Slide Control:
PART COAL EFFECT STONE EFFECT
BURNER
ASSEMBLY
NG GZ9523 GZ11130
LPG GZ11093 GZ11132
DATABADGE
NG PR1590-LG-HE PR1590-LG-HE
LPG PR1590-LG-HE PR1590-LG-HE
BURNER
COVER GASKET
NG CE0273 N/A
LPG CE0498 N/A
All Models
Note: The control valve will be set for the particular
appliance and gas type. In all instances, when ordering
new parts, be sure to quote the appliance type and serial
number.
Use only genuine Gazco replacement parts.
Nonstandard components will invalidate the guarantee
and may be dangerous.