Logic HE Conventional Flue Combined Controls Installation User Instructions

10
5.14 There are three sizes of coal used: 3 x Large, 4 x Small and
1 x Half Moon shaped. For identification, see Diagram 19.
LARGE
HALF MOON
SMALL
19
5.15 Place a single large coal in the right hand dent of the front
coal resting against the flame baffle, see Diagram 20.
20
5.16 Place a second single large coal in the middle dent of the
front coal resting against the flame baffle, see Diagram 21.
21
5.17 Place the third large coal next to the first middle coal and
against the flame baffle, Diagram 22.
22
User Instructions
5.18 Place a small coal directly behind the first large coal, and
rest it on the flame baffle, see Diagram 23.
23
5.19 Place two of the remaining small coals in the spaces next to
the first. The final small coal sits at the front right next to the
large coals, see Diagram 24.
1
2
3
24
5.20 Finally position the Half Moon coal on the top right as
shown, see Diagram 25.
25
5.21 It is essential that gaps are left between the coals to
maximise the performance of the appliance.