Riva2 600 Balanced Flue Installation Instructions

Servicing Instructions

SIDE LINERS

Once the baffle has been placed carefully to one side the

liners can then been taken out in the following order.

3.6 Remove the side liner brackets, see Diagram 8.

3.7 To remove the Right Hand liner first tilt inwards towards the

centre of the firebox before lifting up and pulling out through

the front of the firebox, see Diagram 9.

3.8 To remove the Left Hand liner first tilt inwards towards the

centre of the firebox before lifting up and pulling out through

the front of the firebox, see Diagram 9.

REAR LINER

3.9 Supporting the rear liner remove the 2 brackets from the

back of the firebox, see Diagram 10.

NEVER OPERATE THE APPLIANCE WHEN THE GLASS

PANEL IS REMOVED OR BROKEN.

2.14 Replace the decorative front by referring to the separate

instructions supplied with the front.

NOTE: ENSURE THAT THE LOGS ARE POSITIONED

CORRECTLY, SEE SECTION 5. ONLY USE THE CORRECT

AMOUNT OF LOGS AS SPECIFIED IN THE DIAGRAMS.

2.15 The glass front must be refitted to the appliance following

cleaning or servicing.

3. Baffle & Liners

3.1 To access the burner tray and interior workings of the

appliance it is necessary to remove the baffle and the side

liners.

3.2 Remove the decorative logs.

BAFFLE

The baffle must be removed before the liners can be taken

out of the appliance.

3.3 To do this undo the screws securing it to the roof of the

firebox, see Diagram 6.

Screws

3.4 The baffle can now be removed by lowering the front edge

and pulling forward through the front of the appliance.

TAKE CARE NOT TO DAMAGE THE SIDE PANELS.

3.5 When replacing the baffle ensure that the rear locates on the

shelf at the shelf at the back of the firebox, see Diagram 7.

Shelf