Riva2 600 Balanced Flue Installation Instructions

27
Installation Instructions
9. Fitting the Main Burner
9.1 Angle the burner unit backwards slightly and carefully lower
into the right hand side of the appliance.
9.2 Push the burner unit slightly backwards and slide to the left,
ensuring the venturi engages with the main injector.
9.3 Replace the rear bracket, see Diagram 33.
33
Bracket
9.4 Replace the side brackets, see Diagram 34.
34
Bracket
A
B
B
A
Bracket
9.5 Replace the rear 2 corner screws, see Diagram 34, arrow A.
9.6 Replace the front 2 corner screws, see Diagram 34, arrow B.
10. Fitting the Liners
10.1 The appliance comes with 3 optional liner finishes:
Ledgestone
Brick Effect
Black Glass Linings
10.2 The baffle must be removed before the liners can be fitted.
10.3 To do this undo the screws securing it to the roof of the
firebox, see Diagram 35.
Screws
35
10.4 The baffle can now be removed by lowering the front edge
and pulling forward through the front of the appliance.
TAKE CARE NOT TO DAMAGE THE SIDE PANELS.
10.5 Remove the 2 brackets from the sides (A) and rear (B) of
the firebox, see Diagram 36.
36
A
A
B
B
10.6 Fit the back liner by carefully twisting slightly to insert
through the front of the appliance and lifting over the rear
bracket, see Diagram 37.
37