Riva2 600 Balanced Flue Installation Instructions

25
5b.8 Secure the appliance to the non-combustible board through
the 6 fixing holes, using the anchor fixings provided, see
Diagram 25 & 26.
25
26
Appliance Edge
Appliance Flange
Non-combustible
Board
Fixings
5b.9 Install the decorative front referring to separate installation
instructions.
To finish installation see 5.6.
To Finish the Installation
After commissioning:
5.6 Finish the sides of the chimney breast, see Diagram 27.
27
5.7 A removable access hatch must be left in the side of the
chimney breast for future servicing and inspection of the
appliance.
6. Masonry Installation
The appliance can be installed into brick and block construction or
chimney breast and finished with a plasterboard and skimmed
finish.
This product can also be used in conjunction with the Gazco
Chimney Renovation kit, see separate instructions for details.
There are 2 methods of installation into a masonry chimney:
6a. Edge finish Installation.
6b. Installation with a decorative front.
Carefully read the relevant section for the installation
method required.
Please note it is essential to read and understand the
chosen method of installation before attempt to fit the
appliance.
6a. Edge Finish Installation
6a.1 This method is designed so that non-combustible board can
be taken right up to the edge of the flange of the appliance.
6a.2 Fix the self adhesive foam seal around the back of the fixing
flange of the appliance.
6a.3 Prepare the flue connection using the chosen method
described in Section 2.
6a.4 Connect the flue and install the appliance into the aperture.
At the same time ensure that the gas pipe passes through
the silicon panel at the back of the appliance and the wall
panel cable passes through the side grommet.
Note: It may be necessary to feed the wall plate cable
through the silicon panel during installation.
6a.5 Secure the appliance through the 6 fixing holes using the
screws provided, see Diagram 28.
28
6a.6 Build the chimney breast up to coincide with the edge,
allowing for the front to be skimmed level.
Installation Instructions