Riva2 600 600HL Conventional Flue Installation Instructions

3.4 Disconnect the battery lead from the battery pack, see

Diagram 4.

3.5 Remove the battery pack from the bracket, see Diagram 5.

3.6 Remove the cover by sliding off in the direction of the arrow

as shown in Diagram 6.

Slide cover in

direction of arrow

3.7 Correctly position the four new AA size batteries into the

battery holder.

It is essential to use high quality batteries (Duracell or

equivalent) when replacing batteries in the handset or

control box.

3.8 Re-assemble in reverse order.

PLEASE ENSURE NO WIRES ARE TRAPPED

BEFORE REPLACING THE LOWER SLOTTED

TRIM. THE LEADS ARE EASILY DAMAGED.

4. Cleaning the Appliance

4.1 Make sure the appliance and surrounds are cool before

cleaning.

4.2 If a decorative front has been fitted to the appliance, please

remove by referring to the separate instructions supplied.

4.3 Remove the glass frame by removing the 2 side trims, see

Diagram 7. These are held on by magnets.

4.4 Lift out the bottom slotted trim, see Diagram 8.

Note the orientation of the metal shield for reassembly.

4.5 Disconnect the battery lead from the battery pack attached

to the lower slotted trim, see Diagram 9.

User Instructions