Riva2 600 600HL Conventional Flue Installation Instructions

34
SIDE LINERS
Once the baffle has been placed carefully to one side the
liners can then been taken out in the following order.
4.6 Riva2 600 Models only: Remove the side liner brackets,
see Diagram 9.
9
4.7 To remove the Right Hand liner first tilt inwards towards the
centre of the firebox before lifting up and pulling out through
the front of the firebox, see Diagram 10.
10
4.8 To remove the Left Hand liner first tilt inwards towards the
centre of the firebox before lifting up and pulling out through
the front of the firebox, see Diagram 9.
REAR LINER
Note: The rear liner does not need to be removed to
service the appliance. It only needs to removed to
replace the liner.
4.9 Supporting the rear liner remove the 2 brackets from the
back of the firebox, see Diagram 11.
11
4.10 Remove the back liner by carefully lifting over the bottom
bracket and twisting slightly to allow it to be removed
through the front of the appliance, see Diagram 12.
12
4.11 When replace the rear liner, ensure that the 2 brackets are
replaced.
4.12 With the liners and baffle removed the firebox is clear for
cleaning and maintenance, see Diagram 13.
13
4.13 To replace the liners and baffle reverse these procedures.
Servicing Instructions - Replacing Parts