Riva2 600 600HL Conventional Flue Installation Instructions

27
Installation Instructions
12.8 Place Log L behind Log A. Position in line with Log A
touching the rear panel and creating a continuous curve,
see Diagrams 47 & 52.
52
L
12.9 Log B locates on the stud on Log A and rests on the flat
surface on the emberbed, see Diagrams 47 & 53.
53
B
12.10 Place the 5 small embers in the locations shown in
Diagrams 54 & 55, arrow 1.
54
1
1
1
1
2
2
F
1
55
1
1
1
1
2
2
F
1
Logs removed for clarity
12.11 Place the 2 medium embers in the locations shown in
Diagrams 52 & 53, arrow 2.
12.12 Place the large ember F in the location shown in Diagrams
54 & 55, arrow F.
12.13 Sparingly spread an amount of the Embaglow bres
provided, covering the ports in the burner tray. This will
create a glowing effect when the appliance is lit, see
Diagram 56.
Take care not to use more than half a packet per application.
WARNING - DO NOT PLACE NEAR THE PILOT AREA.
56