Riva2 600 600HL Conventional Flue Installation Instructions

11.7 Lower the rear panel carefully and lean the top up against

the back of the appliance.

11.8 Support the rear liner and replace the 2 brackets, see

Diagram 41.

11.9 To fit the Right Hand liner insert through the front of the

appliance tilting the top inwards towards the centre of the

firebox before lowering into position, see Diagram 42.

11.10 To t the Left Hand liner insert through the front of the

appliance tilting the top inwards towards the centre of the

rebox before lowering into position, see Diagram 42.

11.11 Riva2 600 Models only: Replace the side liner brackets,

see Diagram 43.

Installation Instructions

11.12 Replace the baffle ensuring that the 3 tabs fit into the slots

at the back of the appliance, see Diagram 44. Take care not

to damage the liners.

11.13 Replace the screws (x2 600/ x3 600HL) to secure it to the

roof of the firebox, see Diagram 45.

Screws

Riva2 600 shown

Advice on handling and disposal

of fire ceramics

The fuel effect and side panels in this appliance

are made from Refractory Ceramic Fibre (RCF), a

material which is commonly used for this

application.

Protective clothing is not required when

handling these articles, but we recommend you

follow normal hygiene rules of not smoking,

eating or drinking in the work area and always

wash your hands before eating or drinking.

To ensure that the release of RCF fibres are kept

to a minimum, during installation and servicing a

HEPA filtered vacuum is recommended to

remove any dust accumulated in and around the

appliance before and after working on it. When

servicing the appliance it is recommended that

the replaced items are not broken up, but are

sealed within heavy duty polythene bags and

labelled as RCF waste.

RCF waste is classed as stable, non-reactive

hazardous waste and may be disposed of at a

licensed landfill site.

Excessive exposure to these materials may

cause temporary irritation to eyes, skin and

respiratory tract; wash hands thoroughly after

handling the material.