Riva2 600 600HL Conventional Flue Installation Instructions

24
Installation Instructions
10. Fixing the Burner Assembly
10.1 Replace the rear bracket, see Diagram 35.
35
Bracket
10.2 Replace the 4 screws in each corner of the burner unit, see
Diagram 36.
36
Screws
Screws
10.3 Fit the 2 side brackets supplied in the appliance fixing kit,
see Diagram 37.
37
Bracket Bracket
Check the pilot ensuring it is free from any debris.
11. Removal & Fitting the Liners
11.1 The appliance comes with 3 optional liner finishes:
Ledgestone
Brick Effect
Black Glass Linings
11.2 The baffle must be removed before the liners can be fitted.
11.3 To do this undo the screws (x2 600/ x3 600HL) securing it
to the roof of the firebox, see Diagram 38.
Screws
38
Riva2 600 shown
11.4 The baffle can now be removed by lowering the front edge
and pulling forward through the front of the appliance.
TAKE CARE NOT TO DAMAGE THE SIDE PANELS.
11.5 Riva2 600: Remove the 2 brackets from the sides (A) and
rear (B) of the firebox, see Diagram 39.
Riva2 600HL: Remove the 2 brackets from the rear (B) of
the firebox, see Diagram 39.
39
A
A
B
B
Riva2 600 shown
11.6 Fit the back liner by carefully twisting slightly to insert
through the front of the appliance and lifting over the rear
bracket, see Diagram 40.
40