Riva2 600 600HL Conventional Flue Installation Instructions

10
5.7 Place the front edge of Log A in the indent on the burner
tray. The log rests on the flat surface on the burner tray, see
Diagrams 14 & 18.
18
A
5.8 Place Log L behind Log A. Position in line with Log A
touching the rear panel and creating a continuous curve,
see Diagrams 14 & 19.
19
L
5.9 Log B locates on the stud on Log A and rests on the flat
surface on the emberbed, see Diagrams 14 & 20.
20
B
5.10 Place the 5 small embers in the locations shown in
Diagrams 21 & 22, arrow 1.
21
1
1
1
1
2
2
F
1
22
1
1
1
1
2
2
F
1
Logs removed for clarity
5.11 Place the 2 medium embers in the locations shown in
Diagrams 21 & 22, arrow 2.
5.12 Place the large ember F in the location shown in Diagrams
21 & 22, arrow F.
5.13 Sparingly spread an amount of the Embaglow bres
provided, covering the ports in the burner tray. This will
create a glowing effect when the appliance is lit, see
Diagram 23.
Take care not to use more than half a packet per application.
WARNING - DO NOT PLACE NEAR THE PILOT AREA.
23
User Instructions