Esprit Front For use with the Riva2 500 HL Instructions for Use and Installation For use in GB, IE (Great Britain and Republic of Ireland) PR2437 Issue 1 (October 2017)
Installation Instructions Covering following model numbers: Colour Graphite Esprit 934-268 1. General IMPORTANT: Fitting of this decorative front requires brackets to be fitted to the appliance during installation. 1.1 These instructions are supplementary to, and must be read in conjunction with the instructions supplied with the appliance. Read both thoroughly before installation. 1.2 Fitting of this decorative front requires work to be carried out during the installation procedure.
Installation Instructions The Esprit consists of 6 main components: 2. Pre-Installation 2 Before installing the appliance the following needs to be calculated: Tall Support Frame Tall Section 2.1 Decide on the decorative option required, see Diagram 3. 2.2 Decide on the height from the floor/hearth level to the bottom of the decorative front (recommended 5mm minimum clearance).
Installation Instructions 3. Fitting the Support Frames 3.1 Upper Support Frame Ensure that the 2 Locking Brackets supplied have been fitted to the upper Support Frame, see 3.1. IMPORTANT: Ensure the Support Frames are fitted in the correct orientation for the decorative option required, see Diagram 2. 3.6 Fix the 2 Locking Brackets supplied to the upper Support Frame, see Diagram 5.
Installation Instructions 4. Fitting the Front Lower Section 4.1 4.4 Secure the top of the side infill to the Locating Bracket fitted to the upper Support Frame, see Diagram 10. 10 Position the locating studs into the grooves on the lower Support Frame and carefully lower, see Diagram 8. 8 4.5 Repeat on the other side. Upper Section 4.6 Side Infills 4.2 Position the locating studs into the grooves on the upper Support Frame and carefully lower, see Diagram 11.
Gazco Limited, Osprey Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7JG Technical Customer Services (01392) 261950 Fax: (01392) 261951 E-mail: technicalservices@gazco.
