Logic HE Range Conventional Flue Log Effect Installation User Instructions

8
2b.32 Press the + or - button on the handset to toggle between the
two settings.
Press the SET button to confirm and progress to setting the
day of the week.
Setting the Day of the Week
2b.33 Press and release the + and - buttons until the correct day
of the week is shown on the display.
6
Mo = Monday, Tu = Tuesday, We = Wednesday, Th = Thursday,
Fr = Friday, Sa = Saturday and Su = Sunday.
2b.34 Press SET to confirm the day of the week and progress to
setting the time.
Setting the Hour
2b.35 Press and release the + or - button to change the hour to
the correct hour. Press SET to confirm and progress to
setting the minute.
7
Setting the Minutes
2b.36 Repeat the process to change the minutes.
Setting the Temperature Display (Celsius or Fahrenheit)
2b.37 Press and release the + or - button to toggle between C and
F. When the display shows the desired symbol, press and
release the SET button to store.
8
2b.38 To enter Advanced Settings, see below. To finish, place the
handset down and wait until the home screen is displayed
and the unlock light goes off.
ALL THE NECESSARY SETTINGS REQUIRED HAVE
NOW BEEN COMPLETED. ANY FURTHER
FUNCTIONS ON THIS HANDSET ARE FOR
FACTORY SETTING AND NOT TO BE USED.
The Handset is now ready to operate the appliance.
Advanced Menu Settings
It is possible to change additional preset settings of the control
features.
2b.39 Follow steps 2b.28 to 2b.38 to access the Advanced Menu
Settings. Press and release the SET button to enter the
Advanced Settings Menu.
Advanced Settings are:
Back Light (L)
- A = Automatic (default setting).
The backlight comes on in the dark.
- O = Light never comes on.
- 1 = Light comes on when the handset is unlocked.
Display Contrast (C)
- 8 Levels from 0 - 7 (Default level 4).
P = Pairing with devices other than the Control Box.
This feature is not available on this appliance.
IMPORTANT: THE FURTHER FUNCTIONS ON THIS
HANDSET ARE FOR FACTORY SETTING ONLY
AND ARE NOT TO BE USED.
PLACE THE HANDSET ON A FLAT SURFACE AND
WAIT UNTIL THE HOME SCREEN IS DISPLAYED
AND THE UNLOCK LIGHT TURNS OFF.
Paging the Handset
If the handset is lost it can be located by pressing the + only on the
Control Box for 5 seconds.
The handset will flash and make a noise for 60 seconds to indicate
where it is.
Pick up the Handset and cradle it to unlock. The flashing and noise
will stop.
If the handset is not discovered in 60 seconds the process will
need to be repeated.
User Instructions