Logic HE Balanced Flue Log Installation User Instructions

24
Installation Instructions
7. Removing the Glass Frame
7.1 Remove the glass frame by removing the 4 screws in the
retaining bracket, see Diagram 12.
Detail A
A
12
7.2 Tilt the top of the glass frame forward and disengage
the lower location tabs from the slots in the firebox, see
Diagram 12, Detail A. Place carefully to one side.
8. Arrangement of the Fuel Bed
Advice on handling and disposal
of fire ceramics
The fuel effect and side panels of this
appliance are made from Refractory Ceramic
Fibre (RCF), a material which is commonly
used for this application.
Protective clothing is not required when
handling these articles, but we recommend you
follow normal hygiene rules of not smoking,
eating or drinking in the work area and always
wash your hands before eating or drinking.
To ensure that the release of RCF fibres are
kept to a minimum, during installation and
servicing a HEPA filtered vacuum is
recommended to remove any dust
accumulated in and around the appliance
before and after working on it. When servicing
the appliance it is recommended that the
replaced items are not broken up, but are
sealed within heavy duty polythene bags and
labelled as RCF waste.
RCF waste is classed as stable, non-reactive
hazardous waste and may be disposed of at a
licensed landfill site.
Excessive exposure to these materials may
cause temporary irritation to eyes, skin and
respiratory tract; wash hands thoroughly after
handling the material.
9. Log Layout
LOGS MUST BE POSITIONED ACCORDING TO THE
FOLLOWING INSTRUCTIONS TO GIVE THE CORRECT
FLAME EFFECT.
9.1 Ensure the burner tray is clean and free from any debris, see
Diagram 13.
Note: The LPG and Nat Gas burner trays are visually
different but the log layouts are the same.
13
Nat Gas Burner shown
9.2 Place Log A in position on the 2 locating pins,
see Diagram 14.
14
A
Nat Gas Burner shown
9.3 Spread the Lava Rock evenly over the fuel bed and around
Log A, see Diagram 15.
Ensure that the fuel effect does not obstruct the pilot.
15
Nat Gas Burner shown
Burner Bracket
(Nat Gas only)