Logic HE Balanced Flue Log Installation User Instructions

7.2 Place Log A in position on the 2 locating pins,

see Diagram 18.

Nat Gas Burner shown

7.3 Spread the Lava Rock evenly over the fuel bed and around

Log A, see Diagram 19.

Ensure that the fuel effect does not obstruct the pilot.

Nat Gas Burner shown

Burner Bracket

(Nat Gas only)

7.4 Log B is positioned on the right hand locating pin, and rests

against the back liner, see Diagram 20.

Nat Gas only - ensure that the left hand side rests on the

burner bracket, see Diagrams 19 & 20.

7.5 Log C rests on Log A and the front tray with the locating pin

facing up, see Diagram 21.

7.6 Log D ts onto the locating pin and rests on Log B, see

Diagram 22.

7.7 Position the 2 embers in the front right and back left corners,

see Diagram 23.

7.8 Sparingly spread an amount of the Embaglow bres provided

on the sections highlighted, see Diagram 24.

Take care not to use more than half a packet per

application.

WARNING - DO NOT PLACE NEAR THE PILOT AREA.

User Instructions