Reflex Brochure
WIN
the cost of your
product back!
*
For further home inspiration you can view real life installations
at our Customer Showcase page and share your thoughts and
photos of your new stove or re installation to enter our draw!
• We will publish your entry on our Customer Showcase
• You will be entered into a draw for the chance to win
the cost of your product back
• Gain a second entry by registering your product online
for your free extended warranty: gazco.com/registration
View real life installations and submit your review at
gazco.com/customershowcase
* Terms and conditions apply. See online for details
“The re looks so real”
Further Information
Air Ventilation for gas fires
To comply with gas appliance installation regulations, all conventional flue
Reflex fires require additional ventilation into your room. All fires shown
with the symbol opposite have the advantage of not normally requiring an
air vent* where the air permeability is greater than 5.0m3/hr/m2. Please
consult either your Gazco retailer or the Gazco Technical Information on our website
www.gazco.com to confirm the ventilation required. Please be aware that balanced
flue models still require adequate enclosure venting of warm air back into the room,
as explained below.
*Requirements in the Republic of Ireland are dierent.
Colours / Flame pictures
Owing to variations in studio lighting & printing inks, the finishes/colours of fires
illustrated in this brochure may dier slightly from actual models. Before purchasing,
please ask your retailer to show you finish samples.
All flame pictures shown in this brochure are taken from real fires. Please note
however that flame pictures will vary depending on flue conditions and surrounding
geographical features. Some of the photography in this brochure may not comply
with the requirement of the latest building regulations given as these are subject to
constant change. You should always check your proposed installation arrangement
with a qualified gas installer before proceeding.
Installation and Safety
Gazco gas fires must be fitted by a qualified gas installer (Gas Safe registered in
the United Kingdom or Bord Gáis registered in the Republic of Ireland) who should
also verify the proposed site conditions are fully suitable for the product selected.
Complete installation instructions for many models can be obtained prior to
purchase by viewing or downloading them from www.gazco.com.
When designing your own installation, please also observe the minimum distance
to combustible materials as stated in the installation instructions.
Please note that all parts of these fires, particularly the glass panel in the door,
become extremely hot during operation and can result in serious injury and burns
if touched. It is therefore recommended that a fireguard complying with BS
8423:2002 is used in the presence of young children, the elderly or infirm.
Balanced Flue Convected Warm Airflow
Balanced flue models heat the room with convected warm air via the chimney
breast or enclosure into which the appliance is installed. The void around the fire
must be ventilated at both low and high levels on both sides to prevent heat build
up. These vents take cold air from the room and return it back into the room. Care
must be taken to comply with clearance to combustible materials as detailed in the
instruction manual.
X
“A great option to heat our space, look amazing,
and provide exibility with fuel option.”
“It’s so easy to start up, with
a press of a button!”
“So pleased we chose this gas
alternative to a log burning stove”
Instagram - the_monochrome_stylist
45