Manualshelf

Reflex 75T Multi Sided Balanced Flue Installation Manual

ManualsBrandsGazco ManualsGas FiresEdge
41424344454647484950
43
Screw
2
Withdraw the module and disconnect the LED Mains Lead Plug.
LED Lead Plug
3
Wires
4
5
6
The boards can now be replaced.
NOTE: Each board has the wiring direction marked as IN or OUT
on each end to ensure the replacement boards are wired correctly.
Rear LED bar
Remove the Main Control Assembly.
Remove the 2 screws securing the LED cradle to the underside of
the Control Assembly.
Screw
Screw
7
8
9
Replace in reverse order.
Driver
The driver is located on the underside of the Main Control
Assembly next to the latching Solenoid.
This is a non-serviceable part.
SERVICING INSTRUCTIONS