Reflex 75T Multi Sided Balanced Flue Installation Manual
40
SERVICING INSTRUCTIONS
Top Support Bracket
Bottom Support Bracket
Gap
Gap
5
6
1
2
The side glass does not need to be removed to
install the appliance.
It is recommended to leave the Side Glass in situ
unless absolutely necessary.
The glass panel must be retted to the appliance following cleaning
or servicing.
To replace the glass panel, replace in reverse order.
Ensure that the brackets engage with the glass panel and the
glass is pressed rmly into position.
ENSURE THAT ALL GLASS PANELS ARE FLUSH AND THAT
THERE ARE NO GAPS BETWEEN PANELS.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE GLASS
PANELS ARE LOOSE, DAMAGED, OR MISSING.
Replace the lower and side trim.
2
Top Cam Lock Brackets
Bottom Cam Lock Brackets
3
4