Reflex 75T Multi Sided Balanced Flue Installation Manual
28
INSTALLATION INSTRUCTIONS
ARRANGEMENT OF FUEL BED COMPONENTS
ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS
The fuel effect and side panels in this appliance are made from Refractory Ceramic Fibre (RCF), a material which is
commonly used for this application.
Protective clothing is not required when handling these articles, but we recommend you follow normal hygiene rules of
not smoking, eating or drinking in the work area and always wash your hands before eating or drinking.
To ensure that the release of RCF bres are kept to a minimum, during installation and servicing a HEPA ltered vacuum
is recommended to remove any dust accumulated in and around the appliance before and after working on it. When
servicing the appliance it is recommended that the replaced items are not broken up, but are sealed within heavy duty
polythene bags and labelled as RCF waste.
RCF waste is classed as stable, non-reactive hazardous waste and may be disposed of at a licensed landll site.
Excessive exposure to these materials may cause temporary irritation to eyes, skin and respiratory tract; wash hands
thoroughly after handling the material.
TAKE CARE NOT TO SPILL THE FUEL EFFECT INTO THE PILOT AREA.
ONLY GENUINE GAZCO PARTS CAN BE USED IN THIS APPLIANCE.
Use the entire bag of supplied Amber Effect.
The Shale Effect is supplied as large pieces which will need to be broken into 2-3 smaller shards before placing onto the fuel bed. It is not
necessary to use all the supplied Shale Effect.
LOG LAYOUT
LOGS MUST BE POSITIONED ACCORDING TO THE
FOLLOWING INSTRUCTIONS TO GIVE THE CORRECT FLAME
EFFECT.
THE 3 BURNER LOGS MUST LOCATE CORRECTLY ONTO THE
LOG BURNERS. ENSURE THE AMBER EFFECT DOES NOT
CAUSE THE LOGS TO LIFT OFF THE BURNER.
Ensure the Burner Tray and Log Burners are clean and free from
any debris.
The main components are clearly individually labelled.
D
B
F
A
C
H
G
E
1
F
G H E
F G H
2