Reflex 75T Multi Sided Balanced Flue Installation Manual

19
INSTALLATION INSTRUCTIONS
ENCLOSURE CONSTRUCTION
3 SIDED INSTALLATION
VENTILATION
Note: If the lower section of the enclosure is sealed
(to the oor or capped if designed as a oating
shelf) it will be necessary to provide a vent with a
cut size of 300cm
2
on each side.
If the upper section is sealed (to the ceiling or
capped if designed as a oating shelf) it will be
necessary to provide a vent with a cut size of
300cm
2
on each side.
Gazco recommend building the enclosure from the following
materials:
Metal Studwork
Non-combustible board:
Masterboard or Promafour - NOT PINK BOARD
Heat Resistant Plaster: Purimacho (any spider cracks that develop
after installation will need to be rubbed down and relled with
Purimacho heat resistant ller to stablise).
Ensure all distances to combustible materials are maintained
Example enclosure
1. Side Panel
3. Side Panel
6. Upper Front
Panel
5. Lower Front
Panel
8. Inner
Side
Panel
4. Base Panel
2. Upper Inner
Panel
7. Inner
Side
Panel