Reflex 75T Multi Sided Balanced Flue Installation Manual
17
INSTALLATION INSTRUCTIONS
Position the wall mounting bracket in the required location.
5
6
If required, use the two adjustment bolts at the rear of the appliance
to alter the vertical position of the re.
Wall Bracket removed for clarity
Run the mains power lead out of the rear of the appliance to either
then left hand or right hand side.
Fasten the lead with the P Clip.
(Remove the clip and ret on the opposite side if required.)
Wall Bracket removed for clarity
Once satised with the position of the appliance, tighten the 2 nuts
on either side of the re.
Fit the ue.