Reflex 75T Multi Sided Balanced Flue Installation Manual

11
INSTALLATION INSTRUCTIONS
FLUE OPTIONS
TOP FLUE UP AND OUT WITH
ADDITIONAL BEND
Any additional bend may be used on the horizontal section (either
45° or 90°), but the overall horizontal ue run will be reduced.
When A = 1.0 to 1.499 metres B + C = 1.0 metres maximum
When A = 1.499 metres to 3.0 metres B + C = 4.0 metres maximum
EITHER 45˚
OR 90˚
REFLEX 75T
- TOP FLUE VERTICAL KIT (8524)
This ue is vertical from the top of the appliance. A minimum vertical
rise of 1.5m (4’92”) to a maximum of 10m (32’10”).
The basic kit comprises:
2 x 1m lengths
1 x 1m terminal lengths
1 x 52mm restrictor
1 x 47mm restrictor
1 x 60mm restrictor
1 x 70mm restrictor
Extra lengths may be added from the table on Page 9.