Reflex 75T Balanced Flue User Installation Manual

49
REMOVING THE FUEL EFFECT
The fuel effect consists of 6 different components.
To avoid damage Logs A, B, C and D should be removed in the
following order and placed on a dry, clean surface.
B
C
D
1
A
2
Remove the remaining components:
Log E.
Embers F, G and H.
2 small Embers.
Shale Effect.
Amber Effect.
Keep each component separate for ease of replacing.
REMOVING THE LOG BURNERS
AND MAIN CONTROL ASSEMBLY
1
2
3 2
1
3
4
1
2
WHEN REPLACING THE MESH TRAY TAKE CARE NOT TO
DAMAGE THE LOG BURNER BRACKETS, PILOT AND CROSS
LIGHTER. REPLACE THE FRONT SCREWS FIRST BEFORE
TIGHTENING THE REAR SCREWS.
5