Reflex 75T Balanced Flue User Installation Manual

37
ASSEMBLING THE FUEL BED
1
1
2
2
3
1 2
3
NOTE: RH BURNER IS SHORTER.
4
ARRANGEMENT OF FUEL BED COMPONENTS
TAKE CARE NOT TO SPILL THE FUEL EFFECT INTO THE PILOT AREA.
ONLY GENUINE GAZCO PARTS CAN BE USED IN THIS APPLIANCE.
Use the entire bag of supplied Amber Effect.
The Shale Effect is supplied as large pieces which will need to be broken into 2-3 smaller shards before placing onto the fuel bed. It is not
necessary to use all the supplied Shale Effect.
LOGS MUST BE POSITIONED ACCORDING TO THE FOLLOWING INSTRUCTIONS TO GIVE THE CORRECT FLAME EFFECT.
THE 3 BURNER LOGS MUST LOCATE CORRECTLY ONTO THE LOG BURNERS. ENSURE THE AMBER EFFECT DOES NOT CAUSE
THE LOGS TO LIFT OFF THE BURNER.
Ensure the Burner Tray and Log Burners are clean and free from any debris.