MyFire Wifi Fitting Kit

Installation Instructions - Balanced Flue
1. Fitting the WiFi Module
1.1 Remove the Glass Frame, see Instructions provided with
appliance model.
1.3 Connect the module lead to the WiFi module, see Diagram 1.
1
1.3 Thereceiverislocatedinfrontofthemodulebracket,
beneath the Main Control Assembly, see Diagram 2.
Using long nose pliers connect the other end of the module
lead to the receiver.
Note: Do not force the connector into position, ensure
the connector is at the correct orientation before
inserting.
2
Receiver
1.2 CarefullypositiontheWiFiModuleinthemodulebracket,
ensuring the correct orientation, see Diagrams 3 & 4.
3
4
NOTE: Ensure none of the wires are snagged or caught
on any internal components.
Follow the steps listed in the MyFire App Setup manual
PR2467 to connect a smart device to the re.
1.6 Replace the Glass Frame, see PR2272.
The installation is now complete.
Once the WiFi module has been installed and
connected to a power source there is a 24 hour window
to complete the setup process on the MyFire app.
If setup is not completed in this time the WiFi module
will have to be manually reset to complete setup, see
the installation instructions supplied with the appliance.
Gazco Limited, Osprey Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7JG
Technical Customer Services: [phone] Fax: [phone]
E-mail: [e-mail]
A member of the Stovax Group
E & O E
Balanced Flue Models