Gazco MyFire App

User Instructions

3. Manual Mode

Select the Manual Mode symbol from the menu on the left hand side (press tab to reveal) or the short cut on the right hand side.

In manual mode it is possible to switch from Lo ame to Hi ame, Standby and adjust the temperature by scrolling on the dial.

4. Thermostatic Mode

Set the room temperature so the thermostat automatically maintains that temperature.

Select the Thermostatic Mode symbol from the menu on the left hand side (press tab to reveal)

or the short cut on the right hand side.

After touching the colour wheel, the new set temperature is shown in the middle of the circle for

approx. 3 seconds.

After 3 seconds, the room temperature is shown in the middle of the circle. An arrow either

above or below the room temperature indicates the ame height going up or down to reach set

temperature

5. Countdown Timer

1. Select Countdown Timer from the menu on the left hand side (press tab to reveal) or the

short cut on the right hand side.

2. Spin the hour wheel to set hour. Spin the minute wheel to set minutes.

3. Touch power button to start Countdown Timer.

The time remaining is shown on top of screen next to hourglass icon.

4. Touch power button to stop Countdown Timer.

Note: The location of the menu and icons may vary depending

on the control device used.