Reflex Brochure

Top flue VeRTical KiTs
FOR 6“ REFLEX 75T, 75T-3,
75T-2 AND 8“ REFLEX 105
PLEASE NOTE:
This Reflex 105 Vertical Kit includes an
8” to 6” flue adapter. It is essential when
ordering additional parts to consult the
table in the instruction manual for the
relevant part numbers, which can be
found at www.gazco.com.
0.25m
2.5m
0.5m
MIN
10.0m
MAX
1.5m
MIN
2.0
3.0
1.0
0
0.50 1.0 1.5 2.0 2.5 3.0 3.5
(METERS)
4.0 4.5 5.0 5.5 6.0 6.5
cHiMNeY ReNoVaTioN KiTs
FOR 6“ REFLEX 75T, 75T-3, 75T-2, & 8“ 105
This innovative kit allows balanced flue Reflex fires to be
installed into an existing fireplace opening. Using the kit,
all Reflex fires have the option of a two-liner installation. In
addition, Reflex 75T and 105 fires also have the option of a
single liner, which uses the masonry chimney to bring in air.
Please note, due to their dierent flue collar sizes, Reflex
75T and 105 balanced flue fires require dierent renovation
kits. Your retailer will be able to advise on your specific
requirements.
Adjustable flue
section
Base mounting
plate & spigot
assembly
100mm Flexible
liner (not supplied)
Flue Terminal
Top mounting
plate & spigot
assembly
Existing brick
built chimney
Reflex - Technical Information
Balanced Flue Options
Gazco oers a comprehensive range of balanced flue system components. Please refer to our dedicated Concentric Flue System brochure and individual product instruction manuals, which can be viewed online
at www.gazco.com. Please note that the Reflex 105 BF has been designed with a flue collar size of 8”, whereas the Reflex 75T BF has a flue collar of 6”.
8“ Top flue up aNd ouT KiT FOR REFLEX 105
This product is designed for and requires an 8” flue system for greater
installation flexibility with the Top flue Up and Out kit. It is essential when
ordering additional parts to consult the table in the instructions for the
relevant part numbers.
0
0.2
0.7
1.0
1.5
2.0
2.5
3.0
0.50 1.0 1.5 2.0 2.5 3.0 3.5
(METERS)
4.0
44
up aNd ouT KiT FOR 6“ REFLEX 75T, 75T-3 & 75T-2