Reflex 105 Multi-Sided Installation Instructions 1

9
3. If there are any changes to the home network then the MyFire
Wi-Fi set up must be repeated.
Quick Reference Table - for LED.
LED INDICATOR FOR MYFIRE WI-FI BOX
LABEL LED STATUS
Power Blue
On Power On
Off Power Off
WLAN Green
On
Connected to home network
(Wi-Fi Router)
Off
Not connected to home
network (Wi-Fi Router)
Flashing
MyFire Wi-Fi Box in Access
Point Mode
Receiver Blue On Receiver connected
Off
No receiver connected or
connection lost
All LEDs Flashing Internal Conguration
It may be necessary to reset the MyFire Wi-Fi box using a
paperclip or similar,.
The table below shows the length of time required for each reset
and the confirmation signals.
Press Reset
Button
LED Status
Blue Power LED
Function
1 Sec
Continuously
ashes every ½
second
Activates Access Point
Mode for 10mins (connect
MyFire Wi-Fi module to home
network). Simultaneously the
Wi-Fi channel changes.
5 Secs
Two rapid
ashes every 1
second
System Reset.
10 Secs
Flashes
every 100
milliseconds
(Continuous)
Restore factory rmware
(MyFire Wi-Fi module will set
to default after reboot); takes
up to 2 minutes.
20 Secs
Flashes every
50 milliseconds
(Continuous)
Restores factory rmware and
erases all data not locked.
(MyFire Wi-Fi module will set
to default after reboot); takes
up to 2 minutes.
CLEANING THE APPLIANCE
From time to time it may be necessary to remove build up of debris
and soot from the logs.
Make sure the appliance and surrounds are cool before cleaning.
Remove the side trims and lower trim from the appliance.
Loosen the 7 screws securing the pivot brackets (do not remove).
Using the tool provided turn the 7 Pivot Brackets (4 Top, 3 Bottom)
90° anti-clockwise to the open position.
Top Pivot Brackets
Bottom Pivot Brackets
With the Cam Lock Brackets open, slide the top and bottom support
brackets away from the Front Glass.
Top Support Bracket
Bottom Support Bracket
Gap
Gap