Reflex 105 Multi-Sided Installation Instructions 1

63
8
Disconnect the LED Mains Lead Plug from the Module.
LED wires
Module wires
9
Disconnect the LED plug and Mains lead from the module.
Mains Lead
Module
Lead
LED Plug
10
Disconnect the 3 cables from the Power Module, Arrow A.
NOTE THE CONFIGURATION OF THE WIRES.
A
B
11
Remove the nuts from the Earth stud and remove the two Ring
Terminals, Arrow B.
Loosen the locking screw securing the Power Cable in place.
12
Inside
View
Withdraw the old cable.
Fit the new cable in reverse order ensuring it is rewired in the
original conguration.