Reflex 105 Multi-Sided Installation Instructions 1
61
11
Attach the top and bottom side brackets.
12
Fit the decorative trim.
13
Slide in the side liner.
1.
2.
3.
14
Ret the front glass.
15
Ret one of the decorative side trims and new base trim.
16
To Replace:
Place the Side Glass panel in position. Do not tighten the brackets
at this stage.
Replace the Front Glass Panel and tighten the front brackets,
ensuring the Side Glass sits on the spring clip located in the rear
channel.
Push the rear side brackets up against the side glass and tighten
the screws. Ensure the side glass locates behind the front glass
panel.
Tighten the top and bottom side glass brackets.
Replace the magnetic trim.