Reflex 105 Multi-Sided Installation Instructions 1

58
Remove the Solenoid plug from the Control Box, Arrow A.
Cut the cable tie. NOTE the orientation of the cables.
Replace in reverse order.
Check for leaks.
Ensure that the cable ties are replaced.
CHANGING BETWEEN GAS TYPES
In order to change between gas types it will be necessary to
change both the burner assembly and the complete control
assembly.
Contact your Gazco retailer for further information.
A kit of parts is available for this. Always quote the Model number
and Serial number when ordering any spare parts.
LINERS
Remove the Front Glass, Fuel Effect, and Main burners.
SIDE PANELS - 2 SIDED INSTALLATION
The following instructions assume a right-handed installation. If
tting a left-handed installation the instructions are still correct,
however, the images may not wholly reect the installation in
question.
If tted, remove the decorative trims.
1
2
1
2
BACK PANEL
3
4
1
2
5
To replace the Liners reverse these procedures. Ensure no amber
glass or black shale has fallen onto the side liner inll or liner
support brackets.