Reflex 105 Multi-Sided Installation Instructions 1

FAULT FINDING CHARTS

IGNITION FUNCTIONAL CHECK 1

PILOT WILL NOT LIGHT

Ensure there is no debris around the pilot assembly,

(e.g. soot, etc.) which could short the spark, clean the

area.

Operate the valve.

Is there a spark?

Consult User

Instructions and retry.

Check alignment of pilot

burner head, change the

ignition lead,

See section 7 Replacing Part

Check isolation tap and

gas meter, retry.

Correct and

retry.

Purge the gas pipes and

retry.

GO TO THE NEXT

CHART IGNITION

FUNCTIONAL CHECK 2

SYSTEM OK

There is a blockage in the system, check the inlet test point,

the mag seating, valve and pilot lter.

Is the gas turned on to

the appliance?

Is the gas pressure

correct?

Has the system got

any air in it?

Does the pilot light?

Is the control being

operated correctly?

Will the pilot light

with a match?

Yes