Reflex 105 Multi-Sided Installation Instructions 1
42
6
7
ENSURE THAT ALL GLASS PANELS ARE FLUSH AND
THAT THERE ARE NO GAPS BETWEEN PANELS.
LIGHTING THE APPLIANCE
The appliance is operated by thermostatic and programmable
remote control.
Via the remote it is possible to control the following features:
Child proof
lock
Time
Light
EcoFlex
Mode
Signal
Indicator
Thermostatic
Mode
Dual Burner
Fucntion
Temperature
Program
Mode
Countdown
timer
Battery
Status
TURNING THE APPLIANCE ON
The handset controls the appliance from pilot ignition through to
shut down.
To turn the re on press the button until two short signals and
a series of blinking lines on the handset conrm the start of the
ignition sequence and there will be a clicking sound as the valve
opens on the appliance.
The pilot will ignite and the remote is now in Manual Mode.
The rst time the appliance is turned on it will light in the High
position.
IMPORTANT: YELLOW FLAMES TYPICALLY
APPEAR WHEN THE APPLIANCE HAS REACHED
NORMAL OPERATING TEMPERATURE. THIS CAN
TAKE UP TO 30 MINUTES.
WARNING: IF THE APPLIANCE FAILS TO LIGHT OR
BECOMES EXTINGUISHED IN USE, WAIT 3 MINUTES
BEFORE ATTEMPTING TO RELIGHT.