Reflex 105 Multi-Sided Installation Instructions 1
20
REMOVING THE MOUNTING BRACKET
This appliance weighs 110Kg. The manufacturer
has designed this appliance to attach to a masonry
wall and all xings supplied reect this. However
if desired it is possible to locate the Reex on a
non-combustible studwork wall providing it is
constructed to give adequate load baring support.
I
f intending to install the appliance on a studwork
wall it is essential that the battens are located
across the xing areas of the wall mounting
bracket.
37mm
1076mm
135mm
765mm
50mm
50mm
400mm
400mm
1150mm
37mm
The xing points must be through the timber stud and not
plasterboard. Use appropriate xings.
DO NOT attach solely to a plasterboard wall.
1
2
3
MOUNTING BRACKET