Reflex 105 Balanced Flue Installation Instructions

LINERS

There are several lining options available:

Brick Effect

Ledgestone

Black Glass

The Bafe must be removed before the liners can be taken out of

the appliance, see Section 16.

Remove the Logs and Burners, see Section 4.

Once removed the liners can be taken out.

IMPORTANT: IF THE APPLIANCE IS FITTED

WITH BLACK GLASS LINERS THE BACK PANEL

IS ONE PIECE. THE SIDE PANELS ARE ALSO

SPECIFIC FOR LEFT AND RIGHT - MAKE A NOTE

WHEN REMOVING AND REPLACE IN THE SAME

ORIENTATION.

To remove the side liners:

Undo the 2 screws and remove the Side Liner Brackets.

Black Glass & Brick Effect Side Liners:

Move the top of the liner towards the centre of the rebox and

carefully manoeuvre out of the appliance.

Ledgestone Side Liners:

Move the liner vertically towards the top of the rebox.

Move the front edge of the liner towards the centre of the rebox

and carefully manoeuvre out of the appliance.

All Lining Sets:

To remove the rear liner:

Remove the side liners.

Undo the 4 screws securing the rear liner bracket and remove.

Slide the right hand side of the rear liner as far forward as possible.

SERVICING INSTRUCTIONS